Abstract The purpose of this report is to examine and better understand the discoloration effect over curing has on 3D printed parts to determine what applications may exist. It is of utmost interest to find …
Spring 2022
Horizontal Suspension System
Abstract Vehicle camber is the angle of the tire with respect to the axis of the car body, and is highly influential on vehicle control. A modified design of a double wishbone suspension system is …
3D Printing with Polyethylene (PE) Vitrimers
Christina Harmon, Christopher Lawrence, Justin Tan, Oliyad Dibisa, Jiachen (Tommii) Zeng Abstract Polyethylene (PE) is one of the most used polymers in traditional manufacturing polymer processes. However, it remains a challenge to use PE in …
Interventional Lumbar Spine Procedure Model
Emma Hansen, Quinn Kahle, Aris Magoulas, Ryan Lundeen Abstract The accessibility of both materials and easy to use software have led to the widespread adoption of Additive Manufacturing (AM) techniques by hobbyists and industry professionals …
Final Update: 3D Printed Tactile Maps for the UW-Madison Engineering Campus
Hayden Eisenreich, Isabelle Hanson, Saketh Sridhara, Mikolaj Tyksinski, University of Wisconsin-Madison, Madison, WI Abstract The goal of this project is to create a tactile map of the University of Wisconsin-Madison (UW) Engineering Campus as an …
3D Printed Poster Clamp Final
Project Overview Framing a poster can be expensive and can add a lot of weight. This excess weight can make large nails a necessity to hang up any posters in a dorm or apartment, which …
Botero’s Throat Final Report
Feed Throat Design on Single Screw Extrusion 3D Printer Malachi Alvarez, Zijie Liu, Brandon Sielski, John Torresani University of Wisconsin, USA Abstract Single screw extrusion printers allow a wider variety of materials …
Manufacturing and Testing a Steering Wheel for UW-Madison’s Badgerloop Team – Final Report
James Ruby and Joe Seifert Mechanical Engineering Department, University of Wisconsin-Madison, USA Abstract This project outlines the process for designing and fabricating a steering wheel for the first car that the UW-Madison Badgerloop team …
Accelerated Melting via Viscous Heating
Abstract The purpose of this project is to perform testing on a new additive manufacturing technology. Traditional fused filament fabrication (FFF) printers use heaters to melt the filament in the nozzle. Not only is this …
Books for the Blind – Final Report
Creating 3D picture books for visually impaired and blind persons Ben Armstrong, Brett Edwards, Nathan Flynn, Hannah Fjellman, and George Halunen Abstract The team developed a process to translate 2D children’s books into …